In this guide, we will show you how to bypass the FRP on Ulefone Armor 10 5G smartphone. As we know, the device came out of the box with Android 10 powered by the latest MediaTek 5G chipset; MT6873 Dimensity 800 5G.
If you are someone who has lost the Google account information to access your device after factory reset, then this guide is for you. FRP stands for Factory Reset Protection that protects your device and information, including screen locks and data encryptions. It is enabled automatically when you add the Google account on your device and will be disabled if the Google account is removed from the device prior to the Factory Data Reset.
Pre-Requirements:
- This guide works only on Ulefone Armor 10 5G. Don’t try it on other devices.
- You need a Windows PC or Laptop with a working USB cable.
- Download the SP Flash Tool for bypassing via 1st method.
- For Scatter File: Download Ulefone Armor 10 5G Firmware Flash File
- Download MTK VCOM Drivers and install them on your computer.
- Download and install the Ulefone USB Drivers on your PC.
- Make sure to charge your device to at least 60% before following this step.
- Take a full backup of your device’s internal data.
After following all the pre-requirements mentioned above, now you can follow the flashing steps carefully:
Steps to ByPass FRP lock verification on Ulefone Armor 10 5G
Method 1: Using SP Flash Tool
Follow these instructions carefully to remove FRP lock on Ulefone Armor 10 5G MediaTek-powered device via SP Flash tool:
Warning!
You can also take a look at our video guide to remove the FRP lock on Ulefone Armor 10 5G.
Method 2: Using Infinity CM2
Follow these instructions to bypass FRP lock on Ulefone Armor 10 5G via Infinity CM2:
Method 3: Using Miracle Box Tool
Follow these instructions to bypass FRP lock on Ulefone Armor 10 5G via Miracle Box Tool:
We hope that you’ve successfully bypassed the FRP Lock on your Ulefone Armor 10 5G. If you’ve any issues or queries regarding this, feel free to write them down in the comments below.
